So apparently in 1993, Avon (the MLM (not that MLM (or that kind either))) commissioned a Soft Foam Telephone.
-
Riley S. Faelanreplied to Infoseepage #StopGazaGenocide last edited by
@Infoseepage If you write your novel in Chinese, you won't have to use a single letter of e.
-
@foone diagnosis: wrong goop
-
R [email protected] shared this topic
-
C2 & c9 are 47µF 16v caps
C6 & C8 are 100µF 16v caps
C7 is 1µF 50v cap -
Foone🏳️⚧️replied to xyhhx 🔻 (plz hire me) last edited by
@xyhhx FOONE B TURING: GOOP INSPECTOR
-
@cinebox it's like I'm a doctor for a slimegirl, not an electronics repairer!
-
Desoldered them all. Let's test.
My cap meter is saying C7 is 1116nF, or 1.1µF. Close enough for jazz.
-
my MTester thing says it's got an ESR of 7 ohms, which is high, but I don't think this is gonna mind.
-
The two 100µF caps:
c6: 144 µF, ESR 0.5 ohm.
c8: 148 µF, ESR 0.6 ohm.that's a lot higher than they're supposed to be but again, it may not matter with a device this analog.
-
@foone There's a thing, though… Multiple whitespaces in HTML are usually disregarded and considered as only one. The returned text would have to have special chars explicitly telling your browser not to ignore them.
i.e. I think it's more likely either a font problem or a css problem.
I'd suggest trying to run it again elsewhere, if possible.
Best of luck.
-
the 47 µF caps:
c2: 60 µF, 1.3 ohm ESR
c9: 62 µF, 1.2 ohm ESR -
so none of these caps are good, but none are super smoking-gun either. Still, I desoldered them all, so I'm not putting any back. I'll swap them for some new ones once I can order some
-
replacements will be here tomorrow!
-
I don't currently have a good way to test the oscillator, but I suspect it's working: I get (well, got, I would get nothing now, since I stole all the caps) clicks in pulse dialing mode, which sound vaguely enough like pulse dialing that I'm gonna assume it is. Without an oscillator we shouldn't be getting any clicks
-
There are some ceramic caps on here too, but I didn't desolder or test any of those. I don't think I really need to? unless you fry them by overvoltage/overcurrent I'm not sure they're gonna die anytime soon.
-
@foone sounds like somebody's getting a (working) christmas present!
-
I also don't know if this thing ever worked: this one came from ebay apparently unopened over the last 32 years
-
Solarbird :flag_cascadia:replied to Foone🏳️⚧️ last edited by
@foone ceramics almost always hold up, I wouldn’t bother.
That brown goop looks like a particular glue which is known to become corrosive and conducive over time. But if it’s that, why also hot glue? I has a confusion.
-
It's entirely possible it never worked, and they soldered it together wrong
-
Foone🏳️⚧️replied to Solarbird :flag_cascadia: last edited by
@moira fortunately there's no traces there (since it's single sided) so that shouldn't cause problems
-
@ArthurBarbaro it's a pdf doing font weirdness, not html
