hundreds of polling requests

[julian]

@TheBronx Please do.

We use two processes here, and use nginx with ip_hash; to go between each process, though we don't use polling exclusively.

[TheBronx]

Ok, this is the sample ws server: https://github.com/exo-do/misc/blob/master/multiple instance ws server/ws/index.js
I've started two servers, ports 9090 and 9091, and placed nginx on top of it, WITHOUT ip_hash. This is what happens:

Well, it is normal, long polling is jumping from one instance to the other. Now if I enable ip_hash:

So it seems there is no bug in socket.io long polling. Here is the nginx config I'm using in this test:

upstream io_nodes {
	ip_hash;
	server 127.0.0.1:9090;
	server 127.0.0.1:9091;
}
server {
		listen   8080; ## listen for ipv4; this line is default and implied
		listen   [::]:8080 default ipv6only=on; ## listen for ipv6

		server_name ws.blablablabla.com;
		
		location / {
			proxy_set_header Upgrade $http_upgrade;
			proxy_set_header Connection "upgrade";
			proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
			proxy_set_header Host $host;
			proxy_http_version 1.1;
			proxy_pass http://io_nodes;
		}
}

I've used the default config, and added just what socket.io says you have to add: http://socket.io/docs/using-multiple-nodes/#

We will have to check again and see if our nginx config is exactly the same I'm using here in the test.

[julian]

@TheBronx Might be the link in your post, but yeah... we sometimes do get false positives from Akismet

[TheBronx]

@julian said:

@TheBronx Might be the link in your post, but yeah... we sometimes do get false positives from Akismet

haha no problem, did the trick of posting some shit and then editing with the real message. Akismet, I won.

I can't find what's missing in our nginx conf. I want to try again without cloudflare, it should work...

[TheBronx]

I've been trying nginx configuration for hours but still can't make it work fine.
Some requests keep returning 400 Bad Request, with a message saying: "Session ID unknown"
Enabling the websocket log I've found that when this happens, the following message is printed in the log:
io: 0 emit [ 'disconnect', { reason: 'transport error', rooms: [ 'pLywexv6lX6jRFvcAAAA', 'online_guests' ] } ]

There are also some 502 Bad Gateway errors, but it all seems to be caused by Nginx not being correctly configured for NodeBB and long polling.

I'm not familiar with Nginx, which makes things harder. I've tried with a few configurations found here and there, like:

proxy_buffering off;
proxy_connect_timeout      60s;
proxy_send_timeout         60s;
proxy_read_timeout         60s;
keepalive_timeout          60s;
proxy_buffers 8 32k;
proxy_buffer_size 64k;
large_client_header_buffers 8 32k;

Some of them seem to increase 502 errors, decreasing bad requests, but that's all I can say, pretty useless.

What seems clear to me is:

• CloudFlare is not the problem (at least not right now), cause I'm testing without it, directly targeting Nginx.
• Socket.io alone (without NodeBB) doesn't seem to be the problem either, unless you remove ip_hash from upstreams.
• There is something between nginx and nodebb that is making long polling request to "timeout"?
• When I remove ip_hash from nginx upstreams in nodebb, then I start to see hundreds of requests, without sleeps in between. That's a good improvement!

What I'm noticing now is that whenever a request takes more than 10 seconds to respond, it fails with a bad request. But when the request gets answered before 10s, it works:

We are getting closer, I hope

[baris]

@TheBronx Hey that 10s leads me to believe it might be this piece of code.

https://github.com/NodeBB/NodeBB/blob/master/src/webserver.js#L44-L46

Try commenting it out or increasing it and see if it works.

[TheBronx]

@baris said:

@TheBronx Hey that 10s leads me to believe it might be this piece of code.

https://github.com/NodeBB/NodeBB/blob/master/src/webserver.js#L44-L46

Try commenting it out or increasing it and see if it works.

WHAT THE FUCK IS THAAAAAT haha, it works!!!!!!!!!!!!!!!!!!!!!!!!!
you guys are gonna pay for this xD

[baris]

Does it work with a value like 30? I'll increase it in core.

[TheBronx]

@baris said:

Does it work with a value like 30? I'll increase it in core.

it seems 30000 would be a good limit. anyways, that "magic number" should not be there hehe.

PD: thanks for the help guys! I would have spent a lot of hours configuring nginx @baris haha.

[baris]

@TheBronx If we don't specify it at all the default is 60seconds I believe.

[TheBronx]

HTTP | Node.js v19.8.1 Documentation

2 minutes, if that doc is not wrong

[baris]

Ahh correct, in any case I removed it from master so it will be the default now.

[julian]

@baris @TheBronx ...... how embarrassing

[markkus]

Updated to master & works like a charm ;).

[Gal]

This post is deleted!