Great, now I am looking at hardware firewalls on ebay for a side project to do
-
oh fuck, 32bit xeon.... wow
-
also, 1GB of DDR2 400
let me check my stash
-
Okay, now we are getting something
Found a stash of 2gb pc2 reg ecc
Got the date up to 2024
The old CMOS battery was cooked
-
omg, i can finally take an image
turns out, when using bad ssds that still test "okay" from a NAS... are actually bad.
who knew
-
A minor annoyance, all screws are stainless. My magnetic driver has no effect. Nice build quality I guess.
I just want to boot an OS so I can see WTF the dataplane board shows up as in LSPCI
-
I seem to be ignoring the obvious... replacing the motherboard with something not 3000 years old.
-
I got an X11 generation motherboard installed with some minor chassis modification. With the ASIC card installed, the server wont post. no beeps, no vga, no anything.
Going to stop fucking around with the hardware, and start to disassemble the disk image i took,
-
-
Ryan Castellucci :nonbinary_flag:replied to kajer last edited by
@kajer why is it so fabulous?
-
Ryan Castellucci :nonbinary_flag:replied to kajer last edited by
@kajer that's a password an idiot would use on their luggage
-
kajerreplied to Ryan Castellucci :nonbinary_flag: last edited by
@ryanc
// changePassword is used by Local User Databa/Users and Administrators
// its main purpose is to replace UI 'password' field with <phash>
// It assumes that UI is responsible for sending password when appropirate
// If password is not changed from UI, <password> must NOT be sent, instead
// original <phash> (if available) must be sent back
static function changePassword(&$jsonArgs) {
if ($jsonArgs) {
if (!is_array($jsonArgs)) {
$jsonArgs = Util::objectToArray($jsonArgs);
}
}
$doc = new DOMDocument();
$doc->preserveWhiteSpace = false;
$editing = is_object($jsonArgs);
$id = $jsonArgs['id'];
// <password> is not part of schema we need to trim it out of final xml data
// to do that, load data, then trim
if (!$jsonArgs['set']) {
$doc->loadXML($jsonArgs['data']);
} else {
// new record: Add wrapper <entry> data..</entry> for loading DOMDocument
$doc->loadXML('<entry>' . $jsonArgs['data'] . '</entry>');
}$domData = $doc->documentElement;
$password = $doc->getElementsByTagName('password')->item(0);
$passChange = false;
$passwordValue = '';
// Debug::log("Raw data " . __LINE__ . ' ' . $jsonArgs['data']);if ($password) {
$foundPhash = false;
$passwordValue = $password->nodeValue;
// NOTE: this routine expecting phash is always sent for password change
$phash = $doc->getElementsByTagName('phash')->item(0);
// hash new password
$template = $jsonArgs['template'];
$tplPart = isset($template) ? "<templatename>$template</templatename>": "";
$opCmd = "<request><password-hash><password>" . Xml::escape($password->nodeValue) . "</password><username>" . Xml::escape($jsonArgs["id"]) . "</username>$tplPart</password-hash></request>";
$phashResult = Direct::noLog("Direct::runOpCommand", array($opCmd));
//<response status="success"><result><phash>$1$hwrbwjlu$/Tr8NgIA4oKuqpC.1pnk3.</phash></result></response>
if ($phashResult["@status"] !== "success") {
$exceptionMessage = "";
if (is_array($phashResult["msg"]["line"])) {
$exceptionMessage = join("\n", $phashResult["msg"]["line"]);
}
else if (is_array($phashResult["msg"])) {
$exceptionMessage = join("\n", $phashResult["msg"]);
} else {
$exceptionMessage = $phashResult["msg"]["line"];
}
$exceptionMessage = str_replace("request -> password-hash ->", "-", $exceptionMessage);
throw new Exception (Xml::escape($exceptionMessage));
}
// trim password
$domData->removeChild($password);
if ($phash) {
$phash->nodeValue = Xml::escape($phashResult['result']['phash']);
$foundPhash = true;
}
// LIBXML_NOXMLDECL does not work
//$jsonArgs->data = $doc->saveXML(null, LIBXML_NOXMLDECL);
$xml = $doc->saveXML();
// Debug::log("Line" . __LINE__ . " xml=" . $xml . ' foundHash=' . $foundPhash);
// need to set start to after XML decl <?xml version="1.0"
$xml = substr_replace($xml, '', 0, strlen('<?xml version="1.0"?>'));
// add new object
$phashXML = '<phash>' . Xml::escape($phashResult['result']['phash']) . '</phash>';
if ($jsonArgs['set']) {
// strip off <entry> and </entry> for 'set' command
$start = strpos($xml, "<entry>");
$xml = substr_replace($xml, '', $start, strlen('<entry>'));
$start = strrpos($xml, "</entry>");
$xml = substr_replace($xml, '', $start, strlen('</entry>'));
if ($foundPhash)
$jsonArgs['data'] = $xml;
else
$jsonArgs['data'] = $xml . $phashXML;
} else { //editing object
if ($foundPhash)
$jsonArgs['data'] = $xml;
else
$jsonArgs['data'] = substr_replace($xml, $phashXML, strrpos($xml, "</entry>"), 0);
}
//Debug::log("Line" . __LINE__ . " data=" . $jsonArgs['data']);
$passChange = true;
$jsonArgs['password'] = $passwordValue;
$jsonArgs['phash'] = $phashResult['result']['phash'];
}
return $passChange;
} -
kajerreplied to Ryan Castellucci :nonbinary_flag: last edited by
@ryanc My guess is: It's a custom bios that supports some sort of additional PCIe expander.
Given the issue that the ASIC card won't let me POST on another newer motherboard, but that is just a guess.
