Need help installing NodeBB on CentOS

[a_5mith]

@Paul URL of installation is whatever your website is. If you only have an IP address, use that for now. Redis by default comes without a password, so leave it blank for now, you can come back later and change it.

If you've already got apache or nginx configured, set use port to no, if you don't, you need to set this to yes, once you've got apache and redis configured, you can run setup again, but change the port to no and add the redis password.

Once you've gone through setup, you'll be asked to create an admin account, do that, then run ./nodebb start, go to the URL you entered in the config followed by :4567 (assuming you didn't change it in setup) and you should have nodebb running.

[Paul]

@HolyPhoenix and @a_5mith Thank you for your patience and for trying to help.

I tried installing NodeBB from the beginning again and when I got to sudo npm install -g npm I noticed that I was getting npm WARN unmet dependency in PuTTY as a result. I think I will send my host another support ticket and ask them to install NodeBB for me.

[psychobunny]

I think the npm WARN message you might be able to safely ignore. Did you try going any further? Good luck with the support ticket!

[Paul]

@psychobunny said:

I think the npm WARN message you might be able to safely ignore. Did you try going any further? Good luck with the support ticket!

I ended up signing on with a new host, WiredTree, yesterday and will be leaving HostGator once I get a few domains that I have registered with them transferred to Namecheap. I had an idea that my server with HostGator was messed up but didn't know exactly how much until I installed Magento on a new site with WiredTree. The install went flawlessly on WT and was a nightmare when trying to do the same on HG... all of WT's software is up to date as far as I can tell while some of HG's is close to being end of life. I will try installing NodeBB one more time on my own once things settle down and if I still can't do it, I will send WT a support ticket.

[a_5mith]

@Paul hostgator explains a lot.

Good luck on your magento store, it's great software, I was a senior magento developer a year or two ago, resource heavy though.

[nakre]

@HolyPhoenix
root@server [~]# yum install -g npm
Loaded plugins: fastestmirror, security

root@server [~]# yum install npm
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
Setting up Install Process
No package npm available.
Error: Nothing to do

any suggestion for these erors ?

[a_5mith]

@nakre did you follow this guide to install?

[nakre]

@a_5mith yes, sudo npm install -g npm is where i get error the previous ones went fine

[a_5mith]

I've never used centos, but it appears you're not installing npm inside your nodebb folder, but instead in root?

[nakre]

@a_5mith
root@server [/home/chanrad]# cd nodebb
root@server [/home/chanrad/nodebb]# sudo npm install -g npm
sudo: npm: command not found
root@server [/home/chanrad/nodebb]# sudo yump install -g npm
sudo: yump: command not found
root@server [/home/chanrad/nodebb]# sudo yum install -g npm
^[[ALoaded plugins: fastestmirror, security

root@server [/home/chanrad/nodebb]# yum install npm
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile

• base:
• extras:
• updates:
  base | 3.7 kB 00:00
  extras | 3.4 kB 00:00
  pgdg93 | 3.6 kB 00:00
  updates | 3.4 kB 00:00
  Setting up Install Process
  No package npm available.
  Error: Nothing to do
  root@server [/home/chanrad/nodebb]# yum npm install
  Loaded plugins: fastestmirror, security
  No such command: npm. Please use /usr/bin/yum --help

i'm sure i'm in nodebb folder thats the log..

[a_5mith]

@nakre you are in nodebb, didn't look like it from first logs, lack of npm might suggest you've not got everything from the software stack part. Can you try

cd ../
sudo yum install npm
cd nodebb  
sudo npm install -g npm  
sudo npm install

[nakre]

@a_5mith
root@server [/home/chanrad/nodebb]# cd ../
root@server [/home/chanrad]# sudo yum install npm
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile

• base:
• extras:
• updates:
  Setting up Install Process
  No package npm available.
  Error: Nothing to do
  root@server [/home/chanrad]# cd nodebb
  root@server [/home/chanrad/nodebb]# sudo npm install -g npm
  sudo: npm: command not found
  root@server [/home/chanrad/nodebb]# sudo npm install
  sudo: npm: command not found

when i used sudo yum install nodejs git redis ImageMagick npm

Setting up Install Process
No package nodejs available.
Package git-1.7.1-3.el6_4.1.i686 already installed and latest version
No package redis available.
Package ImageMagick-6.5.4.7-7.el6_5.i686 already installed and latest version
No package npm available.
Nothing to do

[HolyPhoenix]

@nakre

If I remember correctly npm is in the EPEL repository, and based on your error it looks like you don't have the repo enabled. This guide looks pretty good.
http://www.rackspace.com/knowledge_center/article/installing-rhel-epel-repo-on-centos-5x-or-6x

Make sure you use the right EPEL release for your version of centos.

Once you finish that then run the npm command again and it should work. You shouldn't need to install it to the nodebb directory.

[HolyPhoenix]

@nakre

Did adding the EPEL repository work for you?

[nakre]

@HolyPhoenix maybe i should give up.. if i can't manage to install it how could i maintenance it ;x still thanks a lot for helping me out, these comments may help some others as well..

Here are latest logs i have.. i'm kinda very sure i have epel enabled.

root@server [/]# cd home
root@server [/home]# cd chanrad
root@server [/home/chanrad]# cd nodebb
root@server [/home/chanrad/nodebb]# sudo npm install -g npm
sudo: npm: command not found
root@server [/home/chanrad/nodebb]# cd ..
root@server [/home/chanrad]# sudo yum install npm
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile

• base: centos.chi.host-engine.com
• extras: mirror.fdcservers.net
• remi: rpms.famillecollet.com
• updates: mirror.wiredtree.com
  remi | 2.9 kB 00:00
  remi/primary_db | 707 kB 00:00
  Setting up Install Process
  No package npm available.
  Error: Nothing to do
  root@server [/home/chanrad]# cd nodebb
  root@server [/home/chanrad/nodebb]# sudo npm install -g npm
  sudo: npm: command not found

Command line error: no such option: -g
root@server [/home/chanrad]# cd ../
root@server [/home]# sudo yum install npm
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile

• base: centos.chi.host-engine.com
• extras: mirror.fdcservers.net
• remi: mirrors.mediatemple.net
• updates: mirror.wiredtree.com
  Setting up Install Process
  No package npm available.
  Error: Nothing to do
  root@server [/home]# cd home/chanrad
  -bash: cd: home/chanrad: No such file or directory
  root@server [/home]# cd chanrad/nodebb
  root@server [/home/chanrad/nodebb]# sudo npm install -g npm
  sudo: npm: command not found
  root@server [/home/chanrad/nodebb]# sudo npm install
  sudo: npm: command not found
  root@server [/home/chanrad/nodebb]#

root@server [/home/chanrad]# sudo vim /etc/yum.repos.d/remi.repo

[remi]
name=Les RPM de remi pour Enterprise Linux 6 - $basearch
#baseurl=http://rpms.famillecollet.com/enterprise/6/remi/$basearch/
mirrorlist=http://rpms.famillecollet.com/enterprise/6/remi/mirror
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-remi

[HolyPhoenix]

@nakre

Could you show me the output of
- cd /etc/yum.repos.d
- ls

?

[nakre]

@HolyPhoenix Sure here it is..

root@server [~]# cd /etc/yum.repos.d
root@server [/etc/yum.repos.d]# ls
./ epel.repo pgdg-93-centos.repo
../ epel.repo.rpmnew remi.repo
CentOS-Base.repo epel-testing.repo .remi.repo.swp
CentOS-Debuginfo.repo mirrors-rpmforge rpmforge.repo
CentOS-Media.repo mirrors-rpmforge-extras webtatic.repo
CentOS-Vault.repo mirrors-rpmforge-testing
root@server [/etc/yum.repos.d]#

[HolyPhoenix]

@nakre

and what happens if you run?
- cat /etc/release

[nakre]

@HolyPhoenix

root@server [/etc]# cat /etc/release
CentOS release 6.5 (Final)
LSB_VERSION=base-4.0-ia32:base-4.0-noarch:core-4.0-ia32:core-4.0-noarch:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-ia32:printing-4.0-noarch
cat: /etc/lsb-release.d: Is a directory
CentOS release 6.5 (Final)
CentOS release 6.5 (Final)
cpe:/o:centos:linux:6:GA
root@server [/etc]#

[HolyPhoenix]

Hmmm... It looks like the repo files are there, but it appears it isn't loading the repo.

I guess the last thing to check is yum itself. I think you can list the repos yum has loaded with a

 - sudo yum repolist

Edit: I found these instructions online. They mention enabling the EPEL repository within the command itself. That might prove useful.

Node.js and npm are available from the Fedora Extra Packages for Enterprise Linux (EPEL) repository. If you haven't already done so, first enable EPEL.

To check if you have EPEL, run

yum repolist
if you don't see epel, install it via RPM (At the time of this writing, the last version is 6.8.).

First import the key:

sudo rpm --import https://fedoraproject.org/static/0608B895.txt
Then install

sudo rpm -Uvh http://download-i2.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
And then run the following command to install node and npm:

sudo yum install nodejs npm --enablerepo=epel
or if this doesn't work for you install node separately:

sudo yum install npm --enablerepo=epel