@mos_8502 Might be too late for this design round, but very minor suggestion: consider having the front connector bodies at least ~halfway resting on the PCB, so the standoffs have something to rest on (and later possibly be glued down to), as-is I'd w...
-
@mos_8502 Might be too late for this design round, but very minor suggestion: consider having the front connector bodies at least ~halfway resting on the PCB, so the standoffs have something to rest on (and later possibly be glued down to), as-is I'd worry a little about it being too easy to apply torque stress to the solder joints when plugging/unplugging stuff.
I guess not so much of a thing once in a case, I dunno. Vague gut feeling, not an expert.
Either way, where do I sign up for one?
-
@danderson The next iteration will have the SNES connectors recessed -- my plan is to take all the feedback from 4.0 and 4.1, and apply it to a Mini-ITX form factor PTH board as the final prototype or DIY kit release, at which point I can take my time getting the SMD version right.
-
@mos_8502 Makes sense. Always hard to balance just one more tweak and getting stuff built and shipped! I for one appreciate the bias towards shipping and iterating
️