Keep it simple

[email protected]

Dude, this is standard framing that's been done for ages and is in tons of houses in the US. It works, and it's mandated by code for a reason.

[email protected]

That one in the picture is $599 isn't it?

[email protected]

I set up a mesh router pair a while back - super easy setup, and the speed is good enough to have multiple TVs streaming at once, and without needing to run cables between rooms... Worth it.

[email protected]

You mean to say there are tiny little humans working inside all the chips in my devices??

AngryMob

The problem with wireless isn't speed anymore, its stability. For a lot of applications that's fine since buffering and whatnot hides any hiccups. but gaming for example is a nightmare on wireless still.

[email protected]

I'm not disputing any of that. I'm just saying that it seems like it wouldn't work super well.

I'm just some guy on the internet. I'm expecting an opinion. I don't wish to suggest we should do away with it because it's probably not the most helpful thing we could do; not at all. Keep it, use it, be happy and hold a parade.

I still think that it's not as effective as it could be because you'll always have air leak, and probably enough that putting a small hole in a fire break to run a cable probably won't make things much worse.

Code says you have to seal it, so that's what you'd be obligated to do. I'm only questioning if there's better options that would be more effective. That's all.

[email protected]

Wireless tech has improved greatly over the last 20 years. Speed, latency, bandwidth, stability…all generally excellent. 15 years ago I wouldn’t have wanted to use a wireless mouse or LAN connection. Now? NBD. They just work. Still have issues with poor signal in some areas, but mesh range boosters take care of that pretty easily.

[email protected]

$300 is optimistic and true for a simple cable run

Not all cable runs are simple

[email protected]

Yeah, you got to skip over the “getting the wire there” part. If you wanted to replace all that line with cat 5e or cat6 so you can get full duplex gigabit speeds it’d be a much harder task than slapping some rj-45 end onto some old cat 5.

JackbyDev

My house was built around the same time and had the same feature. I guess VOIP stuff was beginning to take off and people still had land lines. I can't imagine much new construction has anything for phones.

JackbyDev

Twisted pairs go brrrrrr

[email protected]

Wireless peripheral devices, sure, but if I'm streaming 4K with HD sound then I still want copper.

[email protected]

Even shitty wireless will let you stream 4k. It only takes 50mbps. 802.11g came out in 2003 and can do 54mbps.

[email protected]

No one should trust you if you don't know that since .ac we have had beam forming and it got better in .ax

This router pictured is a ROG Rapture GT-AX11000 Pro that has .ax

[email protected]

That can be an advantage. Some of the enterprise-level tech has trickled down to consumer WiFi in recent years, which includes browsing between multiple access points. With several access points with relatively weak signal, you get signal right where you need it without broadcasting up and down the street.

[email protected]

What do you plug that cable into??

[email protected]

I've been playing FPS exclusively on wireless for almost 15 years (802.11n 5ghz) and stability has been fine unless you set up your access point far away from your gaming PC for some reason.

Back then you had to get a pretty nice wireless router to do it, but it still worked fine.
Now days even relatively cheap routers will let you game just fine unless you set up far away from the AP and you're in a pro tournament.

[email protected]

I eat my pizza rolls cold, like a savage

[email protected]

Not everyone is comfortable drilling walls and installing plates, stripping wires, etc. and CAT cables aren't like simple copper electrical wires.

And not everyone wants to have cables running along their floorboard and up their stairs

[email protected]

I mean, beam forming is a pretty common feature of these routers.