Both "200" and "160" are 2 minutes in microwave math

[email protected]

I shoot for opening between 0-1. So it clears the timer and doesn't beep. It was either get good at that, or check the manual for how to turn off the beep noise, and I sure as hell wasn't going to learn how to read.

[email protected]

+30s button, twice

TheFlopster

I know, for example, that my microwave completes one full rotation every 10 seconds. If I want to heat something for 45 seconds, it'll end up backwards. But that's on me for not using a multiple of 10 seconds.

[email protected]

Wait you can turn off the beeping???

[email protected]

Huh, all of mine since I was a kid have taken numbers up to 99 in seconds. Gotta admit I've never tried x60-x99

I regularly use 55 or 66 instead of just hitting start 2x which does the 30 second thing because it's so ingrained.

And 44 seconds is known as an Obama, 33 a Truman, 22 a Cleveland, and 11 a Polk.

Pressing more than one number is sacrilege. and 45 is treasonous.

[email protected]

🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️

To save time on things that need to be microwaved for 1:30, I just hit 90 then start. Saves 1 button click.

[email protected]

Clearly shows that hours and minutes are messy units. The French Revolution fixed a lot of stupid problems, but decimal time just didn’t stick for some reason.

Dharma Curious (he/him)

For my microwave its 20 second intervals. But also, let's say I open the door mid-run, if the tray is rotating clockwise, when I restart it it will rotate counterclockwise. Every time you open it it reverses it's rotation.

I don't know if all microwaves do this, or just mine. I never really had cause to notice until I started making desserts and candies, where you often nuke for 10 seconds, stir, 10 seconds, stir to melt chocolate. Easiest to just set for 40 seconds and open/close than it is to reset each time. This is the only microwave I've done that with, though, so idk if it's common

[email protected]

Every microwave I've ever lived with has had a knob to input time. Maybe this is a regional thing?

My old one was completely analog and just had dials for time and power and a single button to open the door. Truly an efficient interface!

[email protected]

Not on all of them. Ask me how I know.

[email protected]

Cannot say why decimal time didn't stick, but a similarly-proposed semi-decimal calendar with 12 months of 3 weeks each of 10 days didn't stick solely because Napoleon didn't like it.

It was also designed to frustrate Sunday church attendance because Sundays being every seven days would usually fall on a weekday on a workweek based on a ten-day week. While Revolutionary France experimented with state atheism and then deism, it eventually returned to Catholicism.

France spread its decimal measurements (the metre, gram, and litre) to the countries that Napoleon conquered or tried to conquer, but by that time, France was well beyond the "stamp out all semblance of religion" phase of its revolution, so a calendar designed with the intent to stifle religious attendance in mind was never going to stick very long once the French had left those territories. Besides, doing maths on length, volume, and mass is something that people do far more often than performing those calculations on dates. Sure, it would have made some things more convenient, but I'm guessing that for most people, the ten-day weeks just stuck out like a sore thumb.

[email protected]

The fastest way to get one minute on a microwave is to press the "add 30 seconds" button twice

IndiBrony

Brb, getting Lemmy gold

[email protected]

I am so saving this for later

psychOdelic

my microwave has a wheel

[email protected]

In normal everyday life, you rarely need to involve time in your calculations. In science and engineering you do, and that’s when you run into problems.

When comparing two pumps, you run into issues like this. Which one is bigger: 29 m^3/h or 410 l/min. Doing calculations like that once or twice is recreational mathematics, but in a professional setting, these conversions just get in the way of getting stuff done.

[email protected]

I've absolutely done it before because I'm weird. Entering 1:90 (on my Kenmore microwave) ticks down 1:89... 1:88... etc. until it hits 1:00 at which point it will continue as normal to 0:59.

1:60 behaves similarly.

Chris

Older (and cheaper) ones have an analogue dial. More modern ones have a digital timer.

[email protected]

I didn’t realize I was so spoiled. On mine, the 1, 2, and 3 buttons add 1-3 minutes, respectively. And I don’t have to hit start either. I want a minute I press 1, done.